| AVM 105S...115S: Actuator (SUT)
How energy efficiency is improved
Automatic adaptation to valve, precision control and high energy efficiency with minimal operating noise.
Areas of application
Actuation of through and three-way valves in the VUN/BUN, VUD/BUD and VUE/BUE, DN15 to DN50 series. For controllers with continuous output (0 - 10 V) or switching output (2-point or 3-point control).
Properties
- Pushing force 250 N in the case of the AVM 105S and 500 N in the case of the AVM 115S
- Stepping motor with SUT (Sauter Universal Technology) electronic control unit and electronic load-dependent cut-off
- Automatic detection of control signal applied (continuous or switching)
- The type of characteristic curve (linear, quadratic or equal percentage) can be adjusted in the drive
- Independent adaptation to valve stroke
- Direction of travel can be switched on cable
- Coding switch for selection of characteristic and running time (35, 60 or 120 sec.)
- Maintenance-free gearbox with magnetic clutch
- Gearbox that can be disengaged for positioning valve manually (Allen key included)
- Assembly with valve takes place automatically after applying the control voltage
Technical description
- 24 V~ or 24 V~/= power supply
- Two-part housing made of self-extinguishing plastic, lower section black, upper section yellow
- Console made of glass-fibre-reinforced plastic
- Brass box nut for fitting valve
- Connecting cable 1.2 m long, 5x 0.75 mm²
- Installation position: vertical to horizontal, but not upside down
|
